What documents must accompany every Indian CRC export shipment?

Core documents include commercial invoice, packing list, shipping bill, bill of lading or mate's receipt for break-bulk, coil MTC per EN 10204 3.1 or 3.2 (chemistry plus mechanical properties per heat and coil), SDS where required, certificate of origin where FTA corridors require it, and EEPC RCMC proof. CBAM report applies to EU-bound CRC parcels. Third-party inspection from SGS, Bureau Veritas, or Intertek applies when LC or buyer contract requires. Automotive tier programmes add PPAP-style vendor approval packs.

What information must appear on an CRC commercial invoice?

Exporter and buyer identity with addresses and IEC / import codes, HS 7209 8-digit line (720915-720917 / 720915-720917 / 720925-720928 / 720990 / 720990) matching the coil form and surface, grade description, thickness, width, coil count, MT total, unit value in agreed currency, regional CRC index reference and premium structure, Incoterm and named port, container and seal number or vessel/parcel reference where already assigned, and reference to the underlying PO or contract for traceability.

How do I structure a cold rolled coil packing list correctly?

The packing list must show coil count, net and gross weight per coil and total, heat and coil identity for every coil matching MTC per EN 10204 references, container and seal number or vessel and parcel reference, and grade description consistent with commercial invoice. Reconcile MT total across invoice, packing list, and shipping bill before CHA submission. Retain sealed edge-cut samples at origin and destination through the arrival retest cycle.

What must an CRC Mill Test Certificate per EN 10204 contain?

An EN 10204 3.1 MTC (or 3.2 with independent inspector countersignature) must state heat chemistry (C, Mn, Si, S, P plus alloys), coil or heat mechanicals (yield, tensile, elongation), dimensions (thickness, width, coil weight), heat/coil identity, mill identity, test method, and issuance date. Automotive programmes may add formability parameters. Heat and coil numbers must match the packing list and tags. Retain sealed edge-cut samples at origin and destination through the arrival retest cycle.

Do cold rolled coil exports require a Safety Data Sheet?

Some destinations request a Safety Data Sheet for CRC covering steel product handling, transport, storage, and any hazardous impurity information. Requirement varies by destination — some EU importers request SDS as part of local regulatory compliance; other corridors do not require it for CRC. Confirm with the buyer and CHA before shipment whether SDS is required. When required, ensure the SDS is current, product-specific to CRC (not a generic steel template), and matches the shipment's actual grade family.

When is a Certificate of Origin required for Indian CRC exports?

A Certificate of Origin is commonly required for destination-country customs and FTA duty claims — SAFTA corridors like Nepal and Bangladesh, ASEAN FTA corridors like Vietnam, and any destination where preferential duty applies to India-origin CRC. Certificate of Origin can be non-preferential (chamber of commerce) or preferential (FTA-specific). Verify destination requirements with the buyer and CHA before shipment, since incorrect or missing certificate can trigger higher duty on arrival that hurts landed-cost math and buyer trust.

What HS 7209 8-digit line do I file on the CRC shipping bill?

File the shipping bill under the India 8-digit line matching the coil SKU: 720915 / 720916 / 720917 for cold-reduced CRC in coils by thickness band; 720925 / 720926 / 720927 / 720928 for CRC not in coils by thickness; 720990 (other). Confirm the 8-digit subheading with your licensed CHA before first shipment for each SKU. Misfiling in-coils as not-in-coils, or vice versa, triggers destination customs disputes. Retain sealed edge-cut samples at origin and destination through the arrival retest cycle.

How do I match heat and coil identity across CRC export documents?

Heat and coil identity originates at the mill hot-strip line and recoiler and must appear on the MTC per EN 10204, packing list coil lines, physical strap tags on every coil, and any inspection or retention-sample records. Reconcile all four before CHA submission. Automotive tier PPAP-style programmes require full heat-to-coil-to-container traceability. Retain sealed edge-cut samples at origin and destination through the arrival retest cycle.

What does ISPM-15 mean for CRC skid and pallet shipments?

ISPM-15 is the international standard for wood packaging material used in transit. When CRC coils ship on wooden skids or saddles, the wood must carry ISPM-15 heat-treatment or fumigation marks and, where destination requires, an accompanying fumigation or treatment certificate. Non-compliant wood can be rejected at destination or trigger costly re-treatment. Confirm destination-specific ISPM-15 rules before stuffing, and note certificates on the packing list so destination customs and receiving service centres can process the shipment cleanly.

How does CBAM reporting appear in CRC export documents for EU parcels?

EU CBAM reporting for HS 7209 CRC parcels requires embedded emissions data collected during mill production, submitted through the CBAM registry per the current reporting cadence, with reference in the commercial invoice, MTC per EN 10204, and any bilateral contract addenda. Data must be collected at production, not retrofitted at shipping-bill filing. Verify current CBAM reporting phase (transitional or definitive) on the European Commission portal, since obligations and financial impact evolve through the roll-out phases into full implementation.

What LC document requirements are typical for CRC shipments?

Letter of credit requirements typically include commercial invoice, packing list, full-set clean-on-board bill of lading (or mate's receipt for break-bulk), coil MTC per EN 10204 3.1 or 3.2, SDS where required, certificate of origin, EEPC RCMC proof, third-party inspection certificate where required by the LC, and CBAM report for EU parcels. Match every document line-item to the LC requirements before presentation, since document discrepancies delay drawdown and add banking cost.

How do I handle third-party inspection documentation for CRC?

Third-party inspection by SGS, Bureau Veritas, Intertek, or equivalent accredited agency typically covers chemistry per lot (OES or ICP-OES), mechanical testing (tensile, bend, impact where required), dimensional verification (thickness, width, coil weight), and surface inspection. The inspection report accompanies commercial documents and is often required for LC drawdown, automotive tier approval, or structural programme sign-off. Specify inspection scope, method, retention-sample handling, and reporting timeline in the purchase contract so the report matches contract requirements.

What documents does an automotive tier buyer request beyond baseline?

Automotive tier CRC buyers often request PPAP-style vendor approval packs, IATF 16949 mill status evidence, chemistry-locked lot traceability documentation, retention edge-cut samples, third-party inspection reports per lot, ISO 14001 environmental management certification, REACH-relevant declarations where destination requires them, and CBAM data for EU-bound parcels. Automotive tier documentation is more extensive than baseline commercial exports — plan the approval-cycle documentation calendar deliberately so first-shipment execution is not delayed by missing documentation that could have been prepared during the vendor-approval cycle.

How do I avoid the most common CRC documentation failures?

The most common failures are heat and coil identity mismatch between MTC per EN 10204 and packing list, wrong HS 7209 8-digit line on the shipping bill, missing CBAM data on EU-bound parcels, lapsed EEPC RCMC discovered mid-negotiation, and unsubstantiated IS 513 or ASTM A1008 SS drawing-grade claims. Run a three-way match on coil identity, MT total, and grade description across invoice, packing list, and MTC before every CHA submission.

How long should I keep CRC export documentation on file?

Keep complete export documentation — invoice, packing list, MTC per EN 10204, shipping bill, bill of lading or mate's receipt, SDS where issued, certificate of origin, inspection reports, LC copies, CBAM reports, and any IATF or PPAP-style vendor approval evidence — for at least seven years to meet Indian customs, tax, and general commercial retention practice, and longer where specific LCs, contracts, or destination-country regulations require. Digital retention with backup improves search and dispute-defence capability.

Export•28 July 2026•26 min read

Cold Rolled Coil Export Documentation Checklist

By Saurabh Mittal, Founder, Altus Exports

Pre-shipment documentation checklist for cold rolled coil exports from India — IEC, EEPC RCMC, commercial invoice, packing list, coil-level MTC per EN 10204, SDS, certificate of origin, HS 7209 filing, CBAM declaration workflow for EU parcels, and buyer-side compliance gates.

Rows of cold rolled coils stored eye-to-sky in a dry Indian export warehouse aisle before port loading — Dry, orderly warehousing on wooden or steel saddles protects CRC surfaces from moisture and preserves coil identity before Mundra, Kandla, Nhava Sheva, Paradip, Vizag, or Haldia dispatch.

Primary Keyword

cold rolled coil export documentation checklist

Search Intent

Operational checklist

Secondary Keywords

CRC commercial invoice packing list
mill test certificate MTC EN 10204
certificate of origin steel export
HS 7209 shipping bill
SGS inspection cold rolled coil India
CRC export documents India
CBAM declaration CRC EU

Semantic Keywords

shipping bill CRC HS 7209 lines
heat coil number packing list match CRC
ISPM-15 wood skid CRC
letter of credit CRC documents

NLP Entities

Cold rolled coils
CRC
HS 7209
HS 720915
HS 720916
HS 720917
EEPC India
JPC (Joint Plant Committee)
Ministry of Steel
IS 513
ASTM A1008
EN 10130
JIS G3141
EN 10204 MTC
CBAM
TARIC
EU steel safeguard
Section 232
USITC HTS 7209
Altus Exports
Saurabh Mittal
WITS
UN Comtrade
ITC Trade Map
Made in Steel Italy
Mundra
Paradip

Related Search Terms

documents required for CRC export from India
EN 10204 MTC for cold rolled coil
packing list CRC coil
COO for cold rolled coil shipment
shipping bill HS 7209 India
third party inspection CRC export

Featured Snippet Answer

A cold rolled coil export document pack typically includes commercial invoice, packing list with coil and heat identity, Mill Test Certificate per EN 10204 3.1 (or 3.2 with independent inspection), Certificate of Origin, shipping bill under the correct HS 7209 India 8-digit line (720915–720917 in coils, 720925–720928 not in coils, or 720990 other), bill of lading (or break-bulk mate's receipt), insurance per Incoterm, CBAM declaration for EU-bound parcels, and optional third-party dimensional / chemical inspection certificates.

AI Overview Summary

CRC documentation fails when coil numbers, EN 10204 MTC chemistry, and packing-list marks do not reconcile. Exporters should prepare docs in parallel with mill dispatch and stuffing — not after vessel cutoff — including CBAM declarations for EU parcels. Altus Exports coordinates checklist-complete CRC shipments for service centres, appliance OEMs, and automotive tier suppliers.

Topical Authority · Related Guides

Documentation is the compliance gate that determines whether a cold rolled coil parcel clears customs smoothly or stalls at destination — and in CRC exports, documentation failures are almost always preventable. IEC proof, EEPC RCMC, commercial invoice, packing list, coil-level MTC per EN 10204, SDS where required, shipping bill, bill of lading, certificate of origin, and CBAM report for EU-bound parcels must cross-reference consistently to the same order, grade, thickness, width, coil number, and HS 7209 8-digit classification.

This checklist walks through every document an Indian CRC exporter should prepare before filing a shipping bill, and every document an international buyer should request before releasing payment on a first or repeat order. Misaligned invoice and packing-list coil counts, MTC parameters that do not match the shipped coils, and incorrect HS 8-digit filing (cold-reduced in coils 720915-720917 vs not in coils 720925-720928 vs not in coils 720925-720928) remain the three most common documentation failures in CRC export — all avoidable with the pre-shipment gate in this guide. India's finished-steel exports (FY2025-26 JPC provisional) at roughly 6.6 Mt mean every document field carries real programme value.

For the complete export process that documentation supports, see How to Export Cold Rolled Coils from India. For EEPC registration context, see EEPC Registration Benefits for Cold Rolled Coil Exporters. Altus Exports maintains documentation discipline across every cold rolled coil shipment as part of its export products from India service.

Key Takeaways

Summary Box

Key Statistics

At-a-glance CRC facts (verify before commit)

HS family: 7209 · width ≥600 mm, cold-reduced, uncoated · confirm 8-digit with CHA
In coils by thickness: 720915 / 720916 / 720917 (in coils by thickness: >=3 mm / 1-<3 mm / <=1 mm; India adds 8-digit form breakouts)
Not in coils: 720925-720928 (not in coils by thickness) — confirm per cut spec with CHA
FY25-26 finished steel: ~6.6 Mt exports · ~6.5 Mt imports · net ~78 kt (JPC provisional) — disaggregate HS 7209
Top destinations: Italy · Vietnam · Belgium · UAE · Spain (finished-steel volume context)
Council: EEPC India RCMC
Origin clusters: Jamshedpur · Odisha/Jharkhand belt · Gujarat coastal · Chhattisgarh
Ports: Mundra · Kandla (Deendayal) · Nhava Sheva (JNPT) · Paradip
Trial → FCL: 25-100 MT (or 1-2 coils by agreement) for grade evaluation → ~20–25 MT practical /20ft or break-bulk
Pricing: Regional CRC index reference (Platts / Argus / SteelMint / Fastmarkets) ± grade, surface, and hardness premium, FOB named Indian port

Summary

Documentation cheat sheet for cold rolled coil export shipments

Every CRC shipment carries a document stack — commercial invoice, packing list, shipping bill, bill of lading, coil-level MTC per EN 10204, SDS where required, certificate of origin, EEPC RCMC copy, CBAM report for EU parcels — that must reconcile line-by-line before CHA submission.
The MTC states chemistry (C, Mn, Si, S, P plus alloy additions) plus mechanical properties (yield, tensile, elongation) with heat and coil identity matching physical tags on every coil; generic templates without real lot identity fail buyer audit at first review.
HS filing depends on coil SKU — 720915-720917 for cold-reduced in coils by thickness, 720925-720928 for not in coils — the invoice, packing list, and shipping bill must all show the same 8-digit line.
Certificate of origin (chamber non-preferential or FTA-preferential where destination duty benefit applies) is required for SAFTA (Nepal, Bangladesh), ASEAN FTA, and other duty-preference corridors; incorrect certificate wording triggers destination duty surprises that hurt trust.
EU CBAM declaration workflow attaches to EU-bound CRC — Italian, Belgian, Spanish, and other EU parcels require embedded emissions data collected during mill production; retrofitting CBAM data at shipping-bill time is not viable.
ISPM-15 marks on wooden skids and saddles, plus ISPM-15 / fumigation for wooden skids where required (radiation clearance is typically a scrap-programme control, not standard mill CRC), prevent otherwise-avoidable clearance holds.
LC-backed transactions require document-set alignment with the LC on every field — discrepancies delay drawdown and add banking cost, so draft the LC around production reality before shipment.
Retain the full document set for at least seven years per Indian customs and tax practice; digital archives with backup support dispute defence and future audit — a merchant exporter can standardise this across CRC programmes.

Executive Summary

Summary Box

CRC export documentation must cross-reference the same HS 7209 8-digit subheading, grade description, coil identity, thickness, width, and quantity across invoice, packing list, MTC per EN 10204, shipping bill, and bill of lading.

Misaligned MTC coil marks, retrofitted CBAM data on EU-bound parcels, and unsubstantiated IS 513 or ASTM A1008 claims remain the top preventable customs and payment delays.

This checklist is the pre-shipment gate exporters and buyers use before CHA filing and destination clearance under HS 7209.

Crane loading a cold rolled coil onto a flatbed trailer for inland haul from an Indian mill to an export port — Jamshedpur, Odisha, Gujarat, Maharashtra, Chhattisgarh, and eastern mill output moves by road or rail to Mundra, Kandla, Nhava Sheva, Paradip, Vizag, or Haldia depending on allocation and vessel string.

Market Size & Industry Overview

Key Statistics

Key statistics: Indian CRC export context

HS family: 7209 · width ≥600 mm, cold-reduced, uncoated · confirm 8-digit with CHA
In coils by thickness: 720915 / 720916 / 720917 (in coils by thickness: >=3 mm / 1-<3 mm / <=1 mm; India adds 8-digit form breakouts)
Not in coils: 720925-720928 (not in coils by thickness) — confirm per cut spec with CHA
FY25-26 finished steel: ~6.6 Mt exports · ~6.5 Mt imports · net ~78 kt (JPC provisional) — disaggregate HS 7209
Top destinations: Italy · Vietnam · Belgium · UAE · Spain (finished-steel volume context)
Council: EEPC India RCMC
Origin clusters: Jamshedpur · Odisha/Jharkhand belt · Gujarat coastal · Chhattisgarh
Ports: Mundra · Kandla (Deendayal) · Nhava Sheva (JNPT) · Paradip
Trial → FCL: 25-100 MT (or 1-2 coils by agreement) for grade evaluation → ~20–25 MT practical /20ft or break-bulk
Pricing: Regional CRC index reference (Platts / Argus / SteelMint / Fastmarkets) ± grade, surface, and hardness premium, FOB named Indian port

Documentation is the operational spine of every Indian CRC export shipment, cross-referencing IEC, EEPC RCMC, MTC per EN 10204, SDS where required, CBAM report for EU parcels, and HS 7209 shipping-bill filings.

The Jamshedpur, Jharkhand-Odisha, Gujarat, Maharashtra, Chhattisgarh, and eastern mill supply base flows through Mundra, Kandla, Nhava Sheva, Paradip, Vizag, and Haldia — each port with its own broker and cutoff discipline.

This overview frames the document-level detail in this guide.

Document-by-Document CRC Export Checklist

Checklist

Every cold rolled coil export shipment requires a consistent document pack. The table below lists each document, what it must contain, and the most common failure mode — use it as a pre-shipment gate before your CHA files the shipping bill under HS 7209.

Cold rolled coil export documentation requirements

Swipe →

Document	Must contain	Common failure
Commercial invoice	Exporter, buyer, HS 7209 8-digit line, grade, thickness, width, coil count, qty MT, unit value	Grade description or HS 8-digit line missing or vague
Packing list	Coil count, MT total, net/gross weight per coil, heat and coil identity	Coil count or heat identity mismatch vs invoice
Coil MTC per EN 10204 3.1	Chemistry (C, Mn, Si, S, P plus alloy) plus mechanicals (yield, tensile, elongation) per heat and coil	MTC references wrong coil or grade
Coil MTC per EN 10204 3.2 (where required)	3.1 content plus independent inspector countersignature	Missing inspector countersignature on structural or automotive programmes
Shipping bill	HS 7209 8-digit (720915-720917 / 720915-720917 / 720925-720928 / 720990 / 720990), FOB value, port	Wrong 8-digit subheading vs coil form
Bill of lading (or mate's receipt for break-bulk)	Consignee, notify party, container/seal numbers or vessel/parcel reference	Consignee mismatch vs invoice
SDS (where required)	Steel product handling data for selected destinations	Wrong-product template not matching CRC
Certificate of origin	Country of manufacture, HS line, exporter identity	Expired or wrong template for FTA claim
EEPC RCMC copy	Current membership proof under HS 7209 scope	Lapsed membership mid-season
CBAM report (EU-bound parcels)	Embedded emissions data per coil per CBAM regulation	Retrofit attempt after mill production
IATF or PPAP-style pack (automotive)	Vendor approval documentation for automotive tier programmes	Claim made without documentation

HS Classification & Trade Notes

Compliance Notes

HS classification must match across invoice, MTC per EN 10204, and shipping bill — cold-reduced in coils 720915 / 720916 / 720917, other in coils 720915 / 720916 / 720917, or not in coils 720925 / 720926 / 720927 / 720928; CHA signs off before vessel cutoff.

HS classification reference for Indian cold rolled coil exports

Swipe →

HS Heading	Scope	Filing Note
7209 (international heading)	Flat-rolled iron/non-alloy steel, width >=600 mm, cold-reduced, not clad/plated/coated	Primary CRC family — India extends to 8-digit ITC-HS lines
720990 (India 720990xx)	In coils, patterns in relief	NOT a residual catch-all — only patterned/relief coils
720915 / 720916 / 720917	Cold-reduced in coils: >=4.75 mm / 3-<4.75 mm / <3 mm	annealed/oiled programmes — India adds 8-digit form breakouts
720915 / 720916 / 720917	Other in coils: >10 mm / 4.75-10 mm / 3-<4.75 mm / <3 mm	Commercial, structural, drawing, full-hard as-rolled in coils
720925	Not in coils, thickness >=3 mm	Cut-to-length CRC sheet — distinct from 720926-720928 bands
720925 / 720926 / 720927 / 720928	Not in coils, other, by thickness band	Cut-to-length / plate / sheet programmes
720990	Other within HS 7209	True residual line — confirm with CHA before filing
7209 / 7210 / 7204 (contrast)	CRC / coated flat / ferrous scrap	Contrast only — never file these for mill CRC lots

Certifications

Compliance Notes

Compliance Note

Compliance note for CRC shipments

Baseline India: IEC, GST, and EEPC India RCMC for HS 7209.
Coil-level EN 10204 3.1 MTC with full chemistry + mechanicals + heat/coil identity — 3.2 with independent inspector where required.
EU-bound: EU CN 7209 lines: verify TARIC duty, live steel safeguard quota status, and CBAM reporting readiness for India-origin CRC before CFR/CIF quotes to Italian, Belgian, Spanish, or other EU buyers.
USA: US HTS 7209 MFN Column 1-General is typically Free for most cold-reduced flat lines. Section 232 steel duties apply on the full customs value — White House / CBP guidance raised the steel article rate to 50% effective 6 April 2026 (prior long-standing guidance was 25%). Country exemptions/TRQs may apply. Always verify live HTS, Chapter 99 overlays, and CBP CSMS before quoting landed cost.
Duty notes are planning references only. Always verify live schedules (TARIC, USITC HTS, ASEAN FTA texts, destination steel safeguard registers) before commercial quotes.

Certification copies must match invoice coil lines - expired IATF status, lapsed RCMC, or missing CBAM data fail buyer audit.

Certifications and documents relevant to cold rolled coil export

Swipe →

Certification / Document	Purpose	Relevant For
Mill Test Certificate (MTC) per EN 10204 3.1	Chemistry and mechanical properties per heat and coil	All commercial CRC shipments — baseline buyer requirement
Mill Test Certificate (MTC) per EN 10204 3.2	Independent inspector countersignature on chemistry and mechanicals	Deep-drawing, automotive, and inspection-heavy programmes
EEPC RCMC + IEC	Baseline export registration and council membership for HS 7209	All commercial cold rolled coil export shipments from India
ISO 9001 (mill / exporter)	Quality-system credibility at mill and export site	Service centres, appliance panel makers, and multinational buyers
IATF 16949 (mill)	Automotive-tier quality-system approval for cold rolled coil supply	Automotive tier vendor-approval programmes only
Third-party inspection (SGS / Bureau Veritas / Intertek)	Independent chemistry, mechanical, dimensional, and surface verification	LC-backed, safeguard-sensitive, or high-value deep-drawing programmes
Certificate of Origin	Country of manufacture; FTA claims where applicable	Destination customs and FTA duty programmes
EU CBAM report readiness	Embedded emissions declaration for EU-bound CRC under CBAM regulation	EU-bound CRC parcels (Italy, Belgium, Spain, and other EU destinations)
Destination steel-standard declaration	IS 513, ASTM A1008, EN 10130 analogue, JIS G3141 SPCC/SPCD/SPCE per contract	Structural and specification-locked programmes
Safety Data Sheet (SDS) where required	Steel product handling and transport data for selected destinations	Some destinations request SDS; confirm with buyer and CHA

Workers stuffing cold rolled coils on wooden saddles into a shipping container for FCL steel export from India under HS 7209 — FCL planning for CRC typically targets ~20–28 MT per 20ft depending on coil weight, ID/OD, and orientation; larger single-mill programmes move as break-bulk vessel parcels.

Shipping Methods

Export Tip

Samples: air-express 5-10 days for sealed edge-cut samples with MTC page
Trial: FCL 2-4 weeks post-production for stock commercial and structural grades
FCL / break-bulk: 3-6 weeks door-to-port by corridor and vessel string
Incoterms: EXW, FOB, CFR/CIF; DDP selective for large industrial CRC programmes

Shipping-document alignment starts with named-port FOB on the invoice — Mundra, Kandla, Nhava Sheva, Paradip, Vizag, or Haldia — matching the bill of lading load port and the shipping-bill export port exactly.

Manufacturing Overview

Export Tip

Documentation packs must reflect how mills batch and coil CRC — heat number, coil number, and cast identity originate at the recoiler, not at the forwarder.

Exporters who reconcile production batch marks and coil identity before invoice finalisation avoid the most common destination customs holds on HS 7209 parcels.

Manufacturing traceability supports every document in the checklist — invoice, packing list, and MTC per EN 10204 must tell one coil story from mill to destination.

Product Categories / Variants

Summary Box

Commercial and forming CRC - service centres, general fabricators, cold-rolling feedstock
Drawing/forming CRC — invoice and MTC must state IS 513 / ASTM A1008 / EN 10130 analogue explicitly
Deep-drawing and extra-deep-drawing CRC - downstream stamping and tubing customers
full-hard CRC - work-hardened coil for downstream annealing and high-strength applications
Annealed and oiled (annealed/oiled) CRC - direct-use fabricators and automotive tier

Grade description on invoice and MTC per EN 10204 must match the export declaration — annealed, structural, drawing, full-hard, and annealed/oiled have different HS 7209 8-digit lines depending on surface and coil form and require distinct chemistry and mechanicals packs.

Primary cold rolled coil product types exported from India

Swipe →

Product Type	Typical Specification	HS (India)	Primary Channel
Commercial and forming CRC	General fabrication chemistry; thickness typically ~0.3-2.0 mm	720915 / 720916 / 720917 (cold-reduced in coils by thickness)	Service centres, general fabricators, re-rolling programmes
Drawing/forming CRC (IS 513 CR drawing grades)	Yield 250-350 MPa class; mechanical properties per IS 513	720915-720917 in coils; 720925-720928 not in coils	Appliance panel makers, construction, appliance and furniture fabrication
Drawing/forming CRC (ASTM A1008 CS/SS/HSLAS)	Commercial/drawing grade per ASTM A1008 CS/SS/HSLAS table	720915-720917 in coils; 720925-720928 not in coils	Global appliance panel makers aligned with ASTM specifications
Deep-drawing CRC (EN 10130 DC04 / DC06)	European structural steel analogues per buyer contract	720915-720917 in coils; 720925-720928 not in coils	EU appliance panel makers, white-goods OEMs, service centres
Deep-drawing and extra-deep-drawing CRC	Cold-forming grade chemistry; downstream stamping and tubing	720915-720917 (cold-reduced in coils, thickness per grade)	Downstream cold-rolling, stamping, and drum and furniture buyers
full-hard CRC	Work-hardened cold-reduced steel; hardness and yield set by reduction ratio and annealing cycle	720915-720917 in coils; specialty lines per assay	Automotive, appliance, and furniture fabrication programmes
Annealed and oiled (annealed/oiled) CRC	Descaled surface with rust-preventive oil; direct-use fabrication	720915 / 720916 / 720917 (cold-reduced in coils by thickness)	Automotive tier suppliers, direct-use fabricators, downstream cold-rollers
Cut-length CRC plates from coil	Cut-to-length sheets and plates from coil source	720925 / 720926 / 720927 / 720928 (not in coils)	Appliance panel makers requiring specific length parcels

Press line stamping cold rolled steel sheet into appliance panels and automotive body parts at an international manufacturing plant — End uses concentrate in white-goods appliance panels, automotive body stamping, furniture fabrication, drum manufacturing, and service-centre slitting across CRC destination markets.

MOQ Analysis

Buyer Tip

Trial: 25-100 MT (or 1-2 coils) after MTC protocol
First FCL: ~20-25 MT practical payload / 20ft
Industrial: monthly MT or break-bulk vessel parcels

MOQ on the invoice must match packing list and MTC coil totals — trial-tonnage mismatches are a common CRC documentation failure.

Packing-list coil counts must match the MOQ band you booked — not a verbal estimate.

Directional MOQ tiers by cold rolled coil transaction stage

Swipe →

Stage	Typical MOQ	Purpose
Trial parcel	25-100 MT (or 1-2 coils by agreement)	Buyer grade evaluation, MTC verification, and dimensional inspection
Standard FCL	Packing-list payload should match ~20-25 MT practical 20ft plan or the agreed break-bulk stow	First commercial shipment; verify coil stow and payload with CHA and forwarder
Break-bulk vessel parcel	Several hundred to several thousand MT per parcel	Larger single-mill industrial programmes into service-centre or structural buyers
Programme contract	Monthly MT contracts or vessel parcels	Service-centre, appliance panel maker, and automotive tier repeat programmes

Packaging Standards

Export Tip

Orientation: eye-to-sky or eye-to-side per equipment
Strapping: steel bands + edge protectors; photo before seal
Wrap: waterproof outer + VCI for annealed/oiled / long ocean legs
Marks: heat/coil ID must match packing list and MTC

Packing list lines must reconcile coil count, net and gross weight per coil, and heat/coil identity with MTC per EN 10204 — packaging documentation errors are among the top shipping-bill hold triggers on HS 7209 parcels.

ISPM-15 fumigation marks apply when wooden skids or saddles are used — note certificate on packing list when destination biosecurity requires it.

CRC coil packaging formats and commercial-practice standards

Swipe →

Format	Typical Configuration	Use Case	Key Requirement
Eye-to-sky coils	Coil axis vertical on wooden or steel saddles	Standard FCL and break-bulk parcels for stockholders and re-rollers	Bottom saddle wide enough to support coil weight without deformation
Eye-to-side coils	Coil axis horizontal on saddles	Service centres and slitting lines with side-loading equipment	Confirm handling equipment at destination service centre before booking
Steel strapping	Circumferential and eye straps with edge protectors	All export coils under HS 7209	Strap tension and count sufficient to prevent slip in transit
Rust-preventive wrap (annealed/oiled coils)	VCI film or oil-impregnated paper around the coil body	Annealed and oiled CRC destined for direct-use fabrication	Prevent surface bloom that compromises downstream forming quality
Waterproof outer wrap	HDPE or reinforced paper waterproof wrap over base wrap	All sea-freight parcels regardless of grade	Prevent salt-air and condensation ingress on multi-week ocean legs
Wooden / steel skids	Skid or saddle geometry matched to coil ID/OD	All export coils to enable forklift and crane handling	Confirm skid strength for coil weight; ISPM-15 marks on wood for destination biosecurity
Coil identity tagging	Heat, coil, grade, thickness, width, net weight on outer wrap or steel plate	All export coils reconciled to MTC and packing list	Legibility of tag after multi-week sea transit critical for destination customs

Container Loading Details

Export Tip

~20-25 MT practical / 20ft — confirm liner and road limits
Lock coil ID/OD and orientation before booking
Photograph stow + seal numbers for claim defence
Break-bulk for larger single-mill programmes

Container number, seal ID, or vessel and B/L reference on shipping documents must match stuffing photos and packing list — document reconciliation includes logistics identifiers, not only MTC chemistry.

Directional container and break-bulk loading guidance for cold rolled coils

Swipe →

Container / Mode	Loading Consideration	Typical Use
20-foot FCL	BL/packing list weight must match the ~20-25 MT practical 20ft plan agreed with the forwarder	Trial and standard commercial CRC shipments
40-foot FCL / HC	Two-coil or multi-coil stow depending on dimensions; check axle load and payload limits	Established service-centre and deep-drawing programmes
Flat-rack containers	Over-height or over-width CRC coils where standard FCL cannot accommodate ID/OD	Speciality coil dimensions beyond standard box internal clearance
Break-bulk vessel parcel	Coils stowed in vessel hold with lashing, dunnage, and weather protection	Large single-mill programmes to Italy, Vietnam, Belgium, UAE, Spain, and other volume corridors
Ro-Ro / project cargo	Rare — used only for specific over-dimension coil projects	Speciality industrial programmes with unusual coil dimensions

Pricing Analysis

Buyer Tip

Base: dated regional CRC index on quote date
Add grade / thickness / width / annealed/oiled premiums separately
Add packing, inspection, named-port inland haulage
Never paste an undated absolute USD/MT screenshot

Pricing on commercial invoice must match proforma and MTC grade description — document disputes often trace to FOB quoted on one chemistry or mechanicals band and shipped on another.

Invoice unit price must reconcile to the dated index offer — not a verbal absolute print.

Directional FOB pricing structure by CRC grade family (regional CRC index ± premium)

Swipe →

Grade / Programme	Pricing Structure	Notes
Commercial and forming CRC (as-rolled)	Regional CRC index reference + baseline commercial premium, FOB	Widest volume tier; premium bands reflect thickness, width, and mill loyalty
Drawing/forming CRC (IS 513 CR grades, ASTM A1008)	Regional CRC index + drawing/forming premium, FOB	ASTM A1008 is the cold-rolled sheet/coil family — lock the buyer spec on CS/SS/HSLAS grade
Deep-drawing and extra-deep-drawing CRC	Regional CRC index + formability premium, FOB	Downstream stamping and tubing customers pay for consistent forming behaviour
Full-hard CRC (work-hardened)	Regional CRC index + full-hard hardness premium, FOB	Work-hardened cold reduction and annealing cycle drive premium above annealed commercial
Annealed and oiled (annealed/oiled) CRC	Regional CRC index + annealed/oiled surface premium over as-rolled equivalent, FOB	Descaled surface with rust-preventive oil; typical for direct-use fabrication
Automotive-grade CRC (IATF vendor list)	Regional CRC index + automotive chemistry + IATF approval premium, FOB	IATF 16949 mill status and PPAP-style vendor approval drive premium tier

Close-up of an Indian cold rolled steel coil with smooth matte finish, visible mill edge, and steel strapping ready for HS 7209 export — CRC export lots ship under HS 7209 as coils typically 0.3–3.0 mm thick with mill edge and matte, bright, oiled, or dry surface finish per buyer specification.

Import Statistics

Key Statistics

FY2025-26 finished-steel imports ~6.5 Mt (JPC provisional)
Thin net exporter (~78 kt) after ~6.6 Mt finished-steel exports
Contrast lines: HRC 7208 · coated 7210 · scrap 7204

Import statistics explain why destination brokers scrutinise MTC on HS 7209 arrivals — India itself imports specialty flat steel alongside its CRC export flows, and destination customs applies the same scrutiny to both directions.

Import contrast lines (7209/7210/7204) must never appear on an CRC shipping bill.

Directional import demand profile by cold rolled coil destination market

Swipe →

Market	Directional Demand Profile	Primary Buyer Type
Italy	Service-centre re-processing plus appliance and furniture fabrication demand across HS 7209	Service centres, appliance panel makers, white-goods OEMs, and re-rolling programmes
Vietnam	Vietnam-bound CRC parcels need EN 10204 MTC depth matched to buyer LC or OEM contract	Tube and pipe mills, appliance panel makers, downstream cold-rolling feedstock buyers
Belgium	Service-centre coil handling and re-export flows into wider EU market	Service centres, distribution stockholders, tube and appliance panel makers
UAE	Gulf industrial and re-export demand across commercial and drawing/forming CRC	Service centres, appliance panel makers, re-export traders, and Gulf industrial buyers
Spain	Drawing/forming and service-centre demand with EU safeguard and CBAM context	Appliance panel makers, white-goods OEMs, and service-centre coil handlers
Nepal	Short-haul CRC demand for appliance and furniture fabrication and general re-rolling	Appliance panel makers, re-rollers, and general trader networks
Bangladesh	Drawing/forming and commercial CRC for construction and downstream fabrication	Appliance panel makers, re-rolling programmes, general traders
Turkey	Service-centre coil handling and appliance and furniture fabrication with safeguard context	Service centres, appliance panel makers, drum and furniture OEMs

Export Statistics

Key Statistics

Key statistics: Indian CRC export context

HS family: 7209 · width ≥600 mm, cold-reduced, uncoated · confirm 8-digit with CHA
In coils by thickness: 720915 / 720916 / 720917 (in coils by thickness: >=3 mm / 1-<3 mm / <=1 mm; India adds 8-digit form breakouts)
Not in coils: 720925-720928 (not in coils by thickness) — confirm per cut spec with CHA
FY25-26 finished steel: ~6.6 Mt exports · ~6.5 Mt imports · net ~78 kt (JPC provisional) — disaggregate HS 7209
Top destinations: Italy · Vietnam · Belgium · UAE · Spain (finished-steel volume context)
Council: EEPC India RCMC
Origin clusters: Jamshedpur · Odisha/Jharkhand belt · Gujarat coastal · Chhattisgarh
Ports: Mundra · Kandla (Deendayal) · Nhava Sheva (JNPT) · Paradip
Trial → FCL: 25-100 MT (or 1-2 coils by agreement) for grade evaluation → ~20–25 MT practical /20ft or break-bulk
Pricing: Regional CRC index reference (Platts / Argus / SteelMint / Fastmarkets) ± grade, surface, and hardness premium, FOB named Indian port

FY2025-26 finished-steel exports ~6.6 Mt (JPC provisional)
Top destinations: Italy, Vietnam, Belgium, UAE, Spain
Re-verify HS 7209 via JPC / DGCI&S / WITS / paid extracts

Shipping bills for CRC should declare the correct India 8-digit line under HS 7209 — 720915-720917 (cold-reduced in coils), 720925-720928 (not in coils), or 720990 (other) — matching the MTC and coil form; statistics and documentation must use the same 8-digit code and grade description.

India's finished-steel exports (FY2025-26 JPC provisional) at ~6.6 Mt with CRC as a major HS 7209 flat-steel line — useful reference when reconciling invoice value to statistical expectations.

Export totals do not replace document reconciliation — HS 7209 on the shipping bill is the filing truth.

India cold rolled coil (HS 7209) trade profile — directional planning references

Swipe →

Metric	Directional Estimate	Notes
Primary integrated mill corridors	Jamshedpur, Jharkhand-Odisha belt, Chhattisgarh	Pickled-hot-band to CRC cold-rolling and annealing capacity anchoring flat-steel export supply
Supporting mill corridors	Gujarat coastal, Maharashtra, eastern belt	Re-rolling, secondary flat capacity, and merchant consolidation programmes
Applicable HS heading	Document stack must show consistent India 8-digit under HS 7209: 720915-720917 (in coils), 720925-720928 (not in coils), 720990 (other)	Confirm India 8-digit line with CHA per SKU before shipping-bill filing
Governing trade council	EEPC India (Engineering Export Promotion Council)	RCMC alongside IEC for HS 7209 flat-steel export credibility
FY2025-26 India finished-steel exports (JPC provisional)	~6.6 Mt across all finished categories (+~36% YoY)	CRC (HS 7209) sits inside the JPC finished-steel envelope — document pack must isolate the 8-digit line before filing
FY2025-26 India finished-steel imports (JPC provisional)	~6.5 Mt across all finished categories (−~32% YoY)	Document packs must not cite ~6.5 Mt finished-steel imports as the HS 7209 shipping-bill quantity
Top finished-steel destinations by volume (JPC / Argus, FY2025-26)	Italy ~1.07 Mt; Vietnam ~772 kt; Belgium ~721 kt; UAE ~486 kt; Spain ~483 kt	Invoice values should reconcile to HS 7209 lots, not to Italy ~1.07 Mt finished-steel headlines
Leading finished-steel import origins into India (FY2025-26)	South Korea, China, Japan, Vietnam, Russia	Directional JPC/Reuters partner set for finished-steel imports — re-verify before net-trade claims
Directional CRC-weighted export corridors	Italy, Vietnam, Belgium, UAE, Spain	Also Nepal, Bangladesh, Turkey, and selected ASEAN, Middle East, Africa industrial buyers
Typical export coil thickness range	~0.3-3.0 mm depending on grade and mill	Documentation must reflect actual thickness band; cut-to-length CRC files under 720925-720928
Typical export coil width	600 mm and above (HS 7209 scope)	Widths below 600 mm sit outside HS 7209; verify against destination coil-width regulations
Common export surface conditions	Matte, bright, oiled, or dry finish	annealed/oiled adds a separate premium tier over as-rolled; skin-pass per contract
Primary port gateways	Mundra, Kandla, Nhava Sheva, Paradip, Vizag, Haldia	West-coast for Gujarat and central belt; east-coast for Jharkhand-Odisha and eastern mills

Buyer Requirements

Grade card: standard · thickness · width · surface · coil ID/OD
MTC: EN 10204 3.1 baseline; 3.2 where required
Credentials: IEC + EEPC RCMC on the invoicing entity
Pricing: dated CRC index + premiums + named FOB port
EU extras: CBAM + safeguard status before CFR/CIF
Automotive extras: IATF mill status + vendor pathway

Buyers in docs CRC programmes request edge-cut samples, a written chemistry and mechanicals spec, coil MTC per EN 10204, index-linked FOB pricing, and EEPC/IEC proof. Service centres and automotive tiers add IATF or CBAM readiness where applicable.

Every buyer field below must later appear on invoice, packing list, and MTC reconciliation.

Country-wise Opportunities

Market Snapshot

Documentation requirements shift per destination row — CBAM reports and EU safeguard licence for Italy, Belgium, Spain; SAFTA certificate of origin for Nepal, Bangladesh; ASEAN FTA papers for Vietnam; Turkish safeguard licence discipline; Gulf destination-standard declarations for UAE. Cross-check with corridor guidance before locking your paperwork template.

Directional country opportunity profile for Indian cold rolled coil exporters

Swipe →

Country	Demand Profile	Key Requirement Focus	Opportunity Note
Italy	Service-centre and appliance and furniture fabrication demand	EN 10130 analogues, EN 10204 3.1/3.2 MTC, CBAM report, EU safeguard licence	Priority EU corridor for Indian CRC — CBAM readiness decisive
Vietnam	Tube mill and appliance and furniture fabrication demand	Commercial and drawing/forming chemistry, timely delivery, FTA duty context	Growing ASEAN corridor for Indian CRC — index-linked pricing discipline critical
Belgium	Service-centre re-processing and EU distribution	EN 10204 MTC, EU safeguard licence, CBAM declaration workflow	Distribution gateway into wider EU market — brand-literate buyers
UAE	Gulf industrial fabrication and Middle East re-export	MTC, ISO, ASTM A1008 or IS 513 declarations per buyer	Gulf re-export hub plus local structural and industrial demand
Spain	Drawing/forming and service-centre demand	EN 10130 analogues, EN 10204 3.1/3.2 MTC, CBAM, safeguard-aware paperwork	EU corridor — drawing-grade fit and CBAM discipline decisive
Nepal	Appliance and furniture fabrication and short-haul re-rolling	Consistent MTC and reliable delivery cadence	Short-haul corridor with SAFTA context — steady repeat volumes
Bangladesh	Construction and downstream fabrication	Consistent MTC and reliable delivery cadence, SAFTA-aware paperwork	Short-sea corridor with construction-driven demand
Turkey	Service centre, white-goods OEM, and appliance and furniture fabrication	MTC, EN 10130 analogues, Turkish safeguard licence discipline	Steel-safeguard-aware EU-adjacent market with active flat-steel buyers

Steel strip on a tandem cold rolling and annealing line at an Indian mill before recoiling into export-grade cold rolled coil — Indian integrated mills convert pickled hot band into CRC through tandem cold reduction, continuous annealing, and skin-pass lines — thickness reduction and annealing cycle set hardness and formability.

Expert Insight: Corridor Discipline

Expert Insight Box

Country customs behaviour on HS 7209 varies materially — Italian broker discipline and EU CBAM workflow differ from Nepalese or Bangladeshi SAFTA practice. Build corridor-specific document sub-checklists inside the master checklist so your CHA delivers cleanly per destination.

Sourcing Checklist

Checklist

Buyer Checklist

Compliance Checklist

Checklist

Compliance Notes

Compliance Note

Compliance note for CRC shipments

Baseline India: IEC, GST, and EEPC India RCMC for HS 7209.
Coil-level EN 10204 3.1 MTC with full chemistry + mechanicals + heat/coil identity — 3.2 with independent inspector where required.
EU-bound: EU CN 7209 lines: verify TARIC duty, live steel safeguard quota status, and CBAM reporting readiness for India-origin CRC before CFR/CIF quotes to Italian, Belgian, Spanish, or other EU buyers.
USA: US HTS 7209 MFN Column 1-General is typically Free for most cold-reduced flat lines. Section 232 steel duties apply on the full customs value — White House / CBP guidance raised the steel article rate to 50% effective 6 April 2026 (prior long-standing guidance was 25%). Country exemptions/TRQs may apply. Always verify live HTS, Chapter 99 overlays, and CBP CSMS before quoting landed cost.
Duty notes are planning references only. Always verify live schedules (TARIC, USITC HTS, ASEAN FTA texts, destination steel safeguard registers) before commercial quotes.

Quality inspector reviewing an EN 10204 mill test certificate beside a cold rolled coil sample with thickness and hardness gauges for CRC export release — MTC per EN 10204 3.1 or 3.2 covers chemistry, hardness, mechanical properties, and dimensional data — buyers reconcile heat number and coil ID against shipped coils before acceptance.

Common Buyer Mistakes

Common Mistakes Box

Future Market Trends

Key Statistics

Customs digitisation and EU CBAM roll-out increase pre-arrival document scrutiny — CRC exporters who QC invoice/MTC/packing list alignment and CBAM data collection during production avoid demurrage trends seen at busy EU ports.

Buyer audit portals now archive SDS, MTC, and CBAM copies per coil — document expiry management becomes ongoing, not shipment-only.

Exporter Checklist

Checklist

Sources

All sources accessed 2026-07-28 during the Cold Rolled Coils factual audit (remediated same day). Prefer primary government and multilateral sources (JPC, Ministry of Steel, TRADESTAT, DGCI&S, WITS/UN Comtrade, TARIC, USITC, White House/CBP Section 232 notices, EEPC, BIS, ASTM, EN standards) when citing figures in contracts or buyer presentations. Finished-steel aggregates are not HS 7209-only volumes.

Document field requirements vary by destination — reconcile this checklist with buyer LC terms, CBAM declaration workflow, and CHA filing rules per consignment.

Workers strapping cold rolled coils with steel bands, edge protectors, and VCI wrap on wooden saddles for ocean-freight export from India — Export CRC ships strapped with steel bands through the eye, edge protectors on outer wraps, VCI or rust-preventive wrap on oiled coils, and waterproof outer wrap for sea transit.

Conclusion

Documentation QC before vessel cutoff prevents destination holds — invoice, packing list, MTC per EN 10204, shipping bill, BL, certificate of origin, and CBAM report for EU parcels must tell one coil story under HS 7209.

Altus Exports assembles export document sets for CRC FCL and break-bulk parcels — export products from India with EEPC-aligned packs.

Start exporters on How To Export Cold Rolled Coils From India; buyers on Source Cold Rolled Coils Directly From India.

Cold Rolled Coil Export Documentation Checklist

Key Takeaways

Executive Summary

Market Size & Industry Overview

Document-by-Document CRC Export Checklist

HS Classification & Trade Notes

Certifications

Shipping Methods

Manufacturing Overview

Product Categories / Variants

MOQ Analysis

Packaging Standards

Container Loading Details

Pricing Analysis

Import Statistics

Export Statistics

Buyer Requirements

Country-wise Opportunities

Expert Insight: Corridor Discipline

Sourcing Checklist

Buyer Checklist

Compliance Checklist

Common Buyer Mistakes

Future Market Trends

Exporter Checklist

Sources

Conclusion

Cold Rolled Coil Export FAQs

Related resources

Industries

Services

Related cold rolled coil export guides

Send an Inquiry