Aluminium Billet Export Documentation Checklist
By Saurabh Mittal, Founder, Altus Exports
Pre-shipment documentation checklist for aluminium extrusion billet exports from India — IEC, EEPC RCMC, commercial invoice, packing list, lot MTC with homogenization chart, certificate of origin, HS 76011020 / 76012020 filing, and extruder-side compliance gates.
Documentation is the compliance gate that determines whether an aluminium extrusion billet shipment clears customs smoothly or stalls at destination — and in this category, documentation failures are almost always preventable. IEC proof, EEPC RCMC, commercial invoice, packing list, lot MTC with homogenization chart, shipping bill, bill of lading, and certificate of origin must cross-reference consistently to the same order, alloy, and India HS 76011020 or 76012020 classification.
This checklist walks through every document an Indian aluminium extrusion billet exporter should prepare before filing a shipping bill, and every document an international extruder buyer should request before releasing payment on a first or repeat order. Misaligned invoice and packing-list billet counts, MTC parameters that do not match the shipped lot chemistry or homogenization data, and incorrect HS subheading filing (not-alloyed 76011020 vs alloy 76012020 vs sibling ingot lines 76011010 / 76012010) remain the three most common documentation failures in aluminium billet export — all avoidable with the pre-shipment gate in this guide. India parent HS 760120 exports (WITS 2024) run at ~US$1.25B / ~0.60 Mt across all alloy cast forms, so every document field carries real programme value for the 6xxx billet subline underneath.
For the complete export process that documentation supports, see How to Export Aluminium Billets from India. For EEPC registration context, see EEPC Registration Benefits for Aluminium Billet Exporters. Altus Exports maintains documentation discipline across every aluminium extrusion billet shipment as part of its export products from India service.
Key Takeaways
Summary Box
Executive Summary
Summary Box
- Build invoice, packing list, MTC + homogenization chart, and shipping bill in parallel.
- Heat / alloy / diameter / length identity must match cradles ↔ packing list ↔ MTC.
- File 76011020 / 76012020 from chemistry — never scrap 7602 or sibling ingot sublines as billets.
- Lock certificate of origin after HS and value fields are final.
- Run a 15-minute pre-seal document cross-check before stuffing completes.
Aluminium extrusion billet export documentation must cross-reference the same India HS billet subheading (76011020 not-alloyed or 76012020 6xxx alloy), alloy description, diameter, length, homogenization status, lot ID, and quantity across invoice, packing list, MTC + homogenization chart, shipping bill, and bill of lading.
Misaligned MTC lot marks, missing homogenization chart pages, and unsubstantiated architectural anodizing-quality or OEM structural claims remain the top preventable customs and payment delays.
This checklist is the pre-shipment gate exporters and extruder buyers use before CHA filing and destination clearance.
Market Size & Industry Overview
Key Statistics
- Document stacks inherit manufacturing identity — heat / alloy / diameter / homogenization starts at the DC-cast floor.
- Cluster of origin should be reconcilable with invoice and MTC cast-house fields.
- As-cast vs homogenized origin must stay consistent across packing list and COO.
- CHA filings fail when manufacturing story and HS billet line disagree.
Documentation is the operational spine of every Indian aluminium extrusion billet export shipment, cross-referencing IEC, EEPC RCMC, MTC + homogenization chart, and India HS 76011020 / 76012020 shipping-bill filings.
The Odisha–Chhattisgarh primary aluminium spine plus Hindalco DC-cast billet programmes and Gujarat / Maharashtra merchant cast-house consolidation flow through Mundra, Paradip, Visakhapatnam, Nhava Sheva, Kandla, or Krishnapatnam — each port with its own broker and cutoff discipline.
This overview frames the document-level detail in this guide.
The Aluminium Billet Export Document Stack
Every aluminium extrusion billet export shipment requires a consistent document pack. The table below lists each document, what it must contain, and the most common failure mode — use it as a pre-shipment gate before your CHA files the shipping bill under India HS 76011020 (not-alloyed billets) or 76012020 (6xxx alloy billets).
Aluminium extrusion billet export documentation requirements
Swipe →
Data table — swipe horizontally on small screens
| Document | Must contain | Common failure |
|---|---|---|
| Commercial invoice | Exporter, extruder buyer, HS 7601 billet subheading, alloy, diameter, length, qty MT, unit value | Alloy or HS billet subheading missing or vague |
| Packing list | Cradle count, MT total, net / gross weight, heat / alloy / diameter / length numbers | Qty mismatch vs invoice |
| Lot MTC + homogenization chart | Mg, Si, Fe, Cu, Mn ceilings per lot plus diameter, length, heat identity, homogenization soak / cool / quench chart | MTC references wrong lot; missing homogenization chart page |
| Shipping bill | India HS 76011020 (not-alloyed) or 76012020 (6xxx alloy), FOB value, port of loading | Wrong eight-digit billet subheading (filed on sibling ingot line) |
| Bill of lading | Consignee, notify party, container / seal numbers | Consignee mismatch vs invoice |
| Certificate of origin | Country of manufacture, HS billet line, exporter identity; FTA form where applicable | Expired or wrong template |
| EEPC RCMC copy | Current membership proof | Lapsed membership mid-season |
| Extruder OEM approval evidence | OEM PPAP-style pack (where claimed) | Claim made without documentation |
| ISPM-15 wood packaging certificate | Fumigation mark on wood cradles / dunnage where used | Missing certificate causes destination hold |
HS Classification & Trade Notes
Compliance Notes
HS classification must match across invoice, MTC description, and shipping bill — not-alloyed billets 76011020 or 6xxx alloy billets 76012020; CHA signs off before vessel cutoff. Sibling ingot lines (76011010 / 76012010) are not the billet filing.
HS classification reference for Indian aluminium extrusion billet exports
Swipe →
Data table — swipe horizontally on small screens
| HS Heading | Scope | Filing Note |
|---|---|---|
| 7601.10 (international) | Aluminium, not alloyed | Parent heading covering all not-alloyed unwrought forms including billets |
| 76011020 (India) | Not-alloyed aluminium billets | PRIMARY billet-line filing for not-alloyed billets — confirm with CHA |
| 76011010 (India) | Not-alloyed aluminium ingots | Sibling ingot line — not the billet filing focus (brief contrast only) |
| 76011030 / 76011040 / 76011090 (India) | Not-alloyed aluminium wire bars / wire rods / other unwrought | Adjacent not-alloyed cast forms — not the billet filing |
| 7601.20 (international) | Aluminium alloys, unwrought | Parent heading covering all alloy unwrought forms including 6xxx billets |
| 76012020 (India) | Alloy aluminium billets | PRIMARY billet-line filing for 6063 / 6061 / 6082 / 6005 and other 6xxx alloy billets |
| 76012010 (India) | Alloy aluminium ingots | Sibling ingot line — not the billet filing focus (brief contrast only) |
| 76012030 / 76012040 / 76012090 (India) | Alloy aluminium wire bars / wire rods / other unwrought | Adjacent alloy cast forms — not the billet filing |
| 7602 / 76020010 / 76020090 | Aluminium waste and scrap | Contrast line — not primary for unwrought billets; recycling feedstock only |
Certifications
Compliance Notes
- Cert copies in the shipping file must match invoice lot lines and dates.
- Expired homogenization audit evidence fails the compliance gate.
- COO wording follows the final HS and value fields — lock those first.
- Keep cert PDFs named by lot / heat for retrieval during claims.
Certification copies must match invoice lot lines — expired homogenization audit evidence or lapsed RCMC fail extruder buyer audit.
Certifications and documents relevant to aluminium extrusion billet export
Swipe →
Data table — swipe horizontally on small screens
| Certification / Document | Purpose | Relevant For |
|---|---|---|
| Mill Test Certificate (MTC) with homogenization data | Lot-specific alloy chemistry (Mg, Si, Fe, Cu, Mn, others as required), diameter, length, heat identity, and homogenization soak / cool / quench record | All commercial aluminium extrusion billet shipments — baseline extruder buyer requirement |
| EEPC RCMC + IEC | Baseline export registration and council membership for Chapter 76 billet sublines 76011020 and 76012020 | All commercial aluminium extrusion billet export shipments from India |
| ISO 9001 (cast-house / exporter) | Quality-system credibility at DC-casting, homogenization furnace, and export site | Architectural fabricator, OEM structural extrusion, and multinational distributor buyers |
| Homogenization furnace chart / temperature log | Documented time-temperature record of soak / cool / quench cycle per billet lot | Homogenized DC-cast 6xxx-series extrusion billet export programmes |
| Third-party assay + homogenization audit (SGS / Bureau Veritas / Intertek) | Independent lot chemistry, diameter, length, and homogenization verification | Architectural anodizing-quality, OEM structural, or LC-backed extrusion programmes |
| Extruder / architectural fabricator quality pack (PPAP-style) | OEM approval of alloy chemistry, homogenization, diameter, length, cradle format, and traceability | Direct architectural fabricator and OEM structural extrusion programmes |
| Certificate of Origin | Country of manufacture; FTA claims where applicable to billet sublines | Destination customs and FTA duty programmes for extrusion billet lots |
| Destination metal standard declarations | Conformance to destination aluminium alloy standards (EN 573-3, AA registered 6063/6061/6082/6005 designations, JIS H 4100 profile alloy references) | Extruder buyers requiring formal alloy standard cross-reference |
Shipping Methods
Export Tip
- Shipping docs must match the Incoterm and transit story sold to the buyer.
- BL dates and packing-list weights reconcile to the booked FCL plan.
- Archive booking confirmations with the compliance file.
- CHA cutoff calendars beat optimistic sales promises every time.
Shipping-document alignment starts with named-port FOB on the invoice — Mundra, Paradip, Visakhapatnam, Nhava Sheva, Kandla, or Krishnapatnam — matching the bill of lading load port and the shipping-bill export port exactly.
Manufacturing Overview
Export Tip
Documentation packs must reflect how DC-cast houses batch and bundle aluminium billets — lot ID and homogenization chart references on MTC originate at casting and homogenization, not at the forwarder.
Exporters who reconcile production batch marks and homogenization furnace chart pages before invoice finalisation avoid the most common destination customs holds on billet lots.
Manufacturing traceability supports every document in the checklist — invoice, packing list, and MTC + homogenization chart must tell one billet lot story.
Saurabh Mittal, our Founder, has a rule he repeats every time we sign a new billet export programme. The MTC and homogenization chart start at the DC-cast house floor, not at the forwarder's desk. If the heat identity on the billet cradle does not match the number on the paper, the whole document stack falls apart at destination customs, and no amount of last-minute paperwork can fix it after the container is sealed.
Saurabh also tells our documentation team that the pre-shipment cross-check is the cheapest insurance in this business. Fifteen minutes comparing invoice, packing list, MTC, and homogenization chart line by line the day before the container seals saves weeks of destination-customs pain and awkward extruder buyer calls that no one wants to make.
Product Categories / Variants
Summary Box
- Document packs differ by alloy — not-alloyed vs 6xxx alloy invoice lines stay split.
- MTC templates should embed the alloy name used on the packing list and homogenization chart reference.
- Adjacent ingot sublines need their own workstreams — do not blend with billet HS lines on the shipping bill.
- Never let as-cast travel under a homogenized architectural document identity.
Alloy description on invoice and MTC must match the export declaration — 6063 architectural, 6061 and 6082 structural, 6005 medium-strength, and not-alloyed billets have different HS billet sublines (76011020 vs 76012020) and require distinct chemistry + homogenization packs.
Primary aluminium extrusion billet product types exported from India
Swipe →
Data table — swipe horizontally on small screens
| Product Type | Typical Chemistry / Spec | HS (India) | Primary Channel |
|---|---|---|---|
| 6063 architectural extrusion billet | Mg-Si alloy per EN 573-3 / AA 6063 registered designation; homogenized DC-cast for anodizing-quality architectural profiles | 76012020 | Architectural extruders, fenestration fabricators, heat-sink and general profile mills |
| 6061 structural extrusion billet | Mg-Si-Cu alloy per EN 573-3 / AA 6061 registered designation; homogenized DC-cast for structural and transport profiles | 76012020 | Transport, defence, marine, and general structural extruders |
| 6082 structural extrusion billet | Mg-Si-Mn medium-to-high strength alloy per EN 573-3 / AA 6082 registered designation; homogenized DC-cast for tolerance-critical profiles | 76012020 | EU and Asia Pacific structural extruders and profile mills |
| 6005 / 6005A medium-strength extrusion billet | Mg-Si medium-strength alloy family per EN 573-3 / AA (confirm 6005 vs 6005A); homogenized DC-cast to buyer press window | 76012020 | Transport, rail, and industrial extruders |
| Not-alloyed extrusion billet | Primary or remelt-cast unalloyed billet chemistry; buyer alloys or homogenizes downstream at their own cast-house | 76011020 | Downstream cast-houses, primary-line distributors, cost-led extruders |
| Custom Mg-Si extrusion chemistry | Buyer-specific 6xxx chemistry window beyond published AA / EN registers; homogenized to buyer press cycle | 76012020 | OEM structural, architectural anodizing-quality, and specialty extrusion programmes |
MOQ Analysis
Buyer Tip
- PO and invoice quantities must match the agreed trial or FCL MOQ band.
- Packing list piece counts should reconcile to the MT figure on the commercial invoice.
- Do not let docs imply a micro-shipment when the booking is a full FCL.
- Archive MOQ acceptance emails with the shipping file.
MOQ on the invoice must match packing list and MTC lot totals — trial-tonnage mismatches are a common documentation failure on billet lots.
Directional MOQ tiers for aluminium extrusion billets by transaction stage
Swipe →
Data table — swipe horizontally on small screens
| Stage | Typical MOQ | Purpose |
|---|---|---|
| Trial order | 5–25 MT | Extruder buyer alloy evaluation, MTC + homogenization verification, and press-fit protocol test |
| Standard FCL | 20–25 MT (20ft FCL) | First commercial billet shipment; verify billet diameter, length, cradle geometry, and payload with CHA |
| Industrial contract | Monthly MT contracts | Extruder, profile mill, architectural fabricator, and distributor repeat programmes |
Packaging Standards
Export Tip
- Packing list lines must mirror cradle tags for heat / alloy / diameter / length.
- ISPM-15 notes apply when wood cradles / dunnage are used.
- Homogenization chart lot references belong on both MTC and packing identity.
- Photo archive of stuffed cradles sits with the shipping file.
Packing list lines must reconcile billet count, cradle count, net / gross weight, and heat / alloy / diameter / length marks with MTC + homogenization chart — packaging documentation errors are among the top shipping-bill hold triggers on billet lots.
ISPM-15 fumigation applies when wood cradles or dunnage are used — note certificate on packing list when destination requires it.
Aluminium extrusion billet packaging formats — commercial cast-house and buyer press-plant practice
Swipe →
Data table — swipe horizontally on small screens
| Format | Typical Configuration | Use Case | Key Requirement |
|---|---|---|---|
| DC-cast round billet geometry | Round DC-cast billets to buyer diameter (commonly 6–12 inch / ~150–305 mm) × length (commonly 3–7 metres cut-to-order) — confirm per mill and press specification | All extrusion billet export programmes | Diameter, length, and squared saw-cut end faces must match buyer press-container plan |
| Not-alloyed vs 6xxx alloy segregation | Separate cast-house pours and lot batches for HS 76011020 (not-alloyed) and 76012020 (6xxx alloy) billets | All mixed-alloy export programmes | Do not commingle not-alloyed and 6xxx alloy lots in the same bundle without clear alloy identity tags |
| Mill-strapped billet bundles / cradles | Buyer-sized cradles or bundles per extrusion press feed cadence; steel cradles or wooden supports as specified | Standard FCL loading for extrusion billet lots | Cradle geometry stable in ocean transit; heat / alloy / diameter identity tags per bundle |
| Marking discipline | Lot / heat / cast tagging on every billet or bundle plus alloy, diameter, length, and homogenization status stencilled or tagged | All aluminium extrusion billet lots | Heat identity + diameter + length + homogenization must reconcile MTC ↔ packing list |
| End-face protection | Squared saw-cut ends protected with end caps or protective film where the buyer press plant requires it | Architectural anodizing-quality and OEM structural extrusion programmes | Prevent end-face oxide staining or damage that affects extrusion press dead-cycle scrap |
| Homogenization status tagging | Homogenized DC-cast billets tagged with soak / cool / quench chart lot reference alongside heat identity | Homogenized 6xxx architectural and structural extrusion programmes | Buyer extruder press acceptance depends on documented homogenization discipline |
| Weather / moisture protection | Dry warehouse staging; wrapping where specified for architectural anodizing-quality lots | All ocean shipments — 6063 architectural anodizing lots especially | Prevent surface oxide staining or contamination before receipt at extrusion mill |
Container Loading Details
Export Tip
- BL / packing list weights must match the verified stow plan.
- Seal numbers on photos must match the shipping bill / BL.
- Archive stow photos with the pre-shipment compliance file.
- CHA needs payload confirmation before the shipping bill finalizes.
Container number and seal ID on the bill of lading must match stuffing photos and packing list — document reconciliation includes logistics identifiers, not only MTC chemistry.
Directional container loading guidance for aluminium extrusion billets
Swipe →
Data table — swipe horizontally on small screens
| Container Type | Loading Consideration | Typical Use |
|---|---|---|
| 20-foot FCL | 20–25 MT payload in mill-strapped billet bundles or cradles; verify stow with forwarder for billet diameter and length | Trial and standard commercial extrusion billet shipments |
| 40-foot FCL / 40-foot HC | Higher payload with dense billet cradle stacking; check max payload limits and cradle stability | Established extruder and profile mill programmes |
| Break-bulk | Large architectural or automotive extrusion billet programmes beyond standard FCL cadence | Mega architectural fenestration and structural extrusion contracts |
| Cradle / palletisation | Recommended for consistent forklift handling and press-plant discharge speed | Extruder buyers with forklift or crane handling at destination plant |
Pricing Analysis
Buyer Tip
- Invoice unit price language should match the dated LME ± billet premium offer.
- Do not let packing-list values drift from the commercial invoice metal basis.
- Document the LME reference date in offer archives for claim defense.
- CHA files need Incoterm clarity before freight is added on CFR/CIF.
Pricing on commercial invoice must match proforma and MTC alloy — document disputes often trace to FOB quoted on one Mg-Si band and shipped on another.
Directional FOB pricing structure by aluminium extrusion billet grade (LME Aluminium ± billet / extrusion premium)
Swipe →
Data table — swipe horizontally on small screens
| Grade / Programme | Pricing Structure | Notes |
|---|---|---|
| 6063 architectural extrusion billet (HS 76012020) | LME Aluminium cash or 3M + 6063 architectural extrusion premium, FOB | Homogenized DC-cast anodizing-quality lots command tighter premium than as-cast |
| 6061 structural extrusion billet (HS 76012020) | LME Aluminium + 6061 structural extrusion premium, FOB | Mechanical-spec buyers add third-party assay premium as required |
| 6082 structural extrusion billet (HS 76012020) | LME Aluminium + 6082 structural extrusion premium, FOB | EU and Asia Pacific structural profile programmes drive premium tier |
| 6005 / 6005A medium-strength extrusion billet (HS 76012020) | LME Aluminium + 6005 / 6005A medium-strength extrusion premium, FOB | Confirm exact AA/EN designation; transport, rail, and industrial profile spec drives premium |
| Not-alloyed billet (HS 76011020) | LME Aluminium + not-alloyed billet premium, FOB | Buyers alloy or homogenize downstream at their own cast-house; premium closest to LME cash |
| Custom Mg-Si extrusion chemistry (HS 76012020) | LME Aluminium + custom-alloy + homogenization premium, FOB | Chemistry window beyond published AA / EN designations; homogenization chart per lot |
Import Statistics
Key Statistics
- Import-side compliance notes (duty, standards) belong in the destination checklist pack.
- Do not copy a Mexico import compliance pack onto a Korea OEM structural file.
- Archive destination import buyer-type assumptions next to the shipping docs.
- Scrap HS lines never belong in billet import / export document narratives.
Import demand profiles explain why destination brokers scrutinise MTC + homogenization chart on HS 7601 billet arrivals — Korean and Japanese OEM-linked extruders, Mexican and Brazilian architectural fabricators, Turkish structural profile mills, and US extruders each apply different acceptance criteria on the same eight-digit billet line.
Directional import demand profile for Indian aluminium billets by destination market
Swipe →
Data table — swipe horizontally on small screens
| Market | Directional Demand Profile | Primary Buyer Type |
|---|---|---|
| Mexico | 6063 architectural + 6061 / 6082 structural extrusion offtake tied to nearshoring investment in profile mills | Extruders, architectural fabricators, transport-profile mills |
| Brazil | 6063 architectural fenestration + 6082 structural extrusion demand | Architectural extruders, fenestration fabricators, distributors |
| South Korea | 6082 / 6061 high-spec extrusion + 6063 architectural + rolling-adjacent extrusion feed | High-spec extruders, profile mills, architectural fabricators |
| United States | 6063 architectural + 6061 / 6082 structural extrusion offtake; Section 232 aware landed-cost planning | Extruders, architectural fabricators, transport-profile mills |
| Turkey | 6063 architectural + 6082 structural extrusion demand for fenestration and industrial profiles | Extruders, architectural fabricators, structural profile mills |
| Japan | 6082 / 6061 high-spec extrusion for transport and industrial profiles; tight impurity and homogenization ceilings | OEM-linked extruders, structural profile mills |
| Malaysia | 6063 architectural extrusion and distributor demand across Southeast Asia | Extruders, distributors, regional profile mills |
| Vietnam | Expanding architectural extrusion and structural profile mill capacity pulling 6063 and 6082 billets | Extruders, architectural fabricators, distributors |
Export Statistics
Key Statistics
- Document packs must reconcile shipping-bill HS with the export-stat story you told the buyer.
- Parent HS figures belong in market notes; eight-digit billet codes belong on the bill.
- Archive DGCI&S extracts next to offer files for claim defense.
- Do not let brochure export stats override CHA billet classification.
Shipping bills for aluminium extrusion billets should declare India 76011020 (not-alloyed billets) or 76012020 (6xxx alloy billets — 6063 / 6061 / 6082 / 6005) matching the MTC alloy chemistry and DC-cast billet form; do not file on sibling ingot sublines 76011010 / 76012010, and never file scrap 7602 for cast billet lots.
Directional WITS / UN Comtrade 2024 anchors: ~US$3.50B / ~1.41 Mt on parent HS 760110 and ~US$1.25B / ~0.60 Mt on parent HS 760120 — useful reference when reconciling billet invoice value to statistical expectations, remembering billet tonnage is a subline inside the parent.
India aluminium billet trade profile (WITS 2024 parent HS 760110 not-alloyed / HS 760120 alloy — directional context; billet sublines 76011020 / 76012020 sit inside)
Swipe →
Data table — swipe horizontally on small screens
| Metric | Directional Estimate | Notes |
|---|---|---|
| Primary DC-cast corridors | Odisha (NALCO Angul, Vedanta Jharsuguda), Chhattisgarh (BALCO) | Large-scale primary aluminium capacity feeding DC-cast extrusion billet supply |
| Supporting clusters | Hindalco / Aditya Birla extrusion billet programmes; Gujarat and Maharashtra merchant cast-house consolidation; secondary-to-billet corridors | Downstream cast-house discipline and merchant-consolidation billet capacity |
| Applicable HS lines | Document stack must show consistent India eight-digit: 76011020 for not-alloyed billets or 76012020 for 6xxx alloy billets — never confuse with sibling ingot sublines 76011010 / 76012010 | Confirm eight-digit billet line with CHA before shipping-bill filing |
| Governing trade council | EEPC India (Engineering Export Promotion Council) | RCMC alongside IEC for Chapter 76 billet export credibility |
| 2024 India HS 760110 exports (parent, not-alloyed unwrought) | ~US$3.50B / ~1.41 Mt | US$3,503,308.31K / 1,409,040,000 kg — WITS / UN Comtrade 2024; PARENT heading covers ingots plus billets plus wire bars plus wire rods plus other cast forms — not-alloyed BILLET-only tonnage (India 76011020) is a subline inside this total |
| 2024 India HS 760110 imports (parent, not-alloyed unwrought) | ~US$225.4M | US$225,428.14K — WITS / UN Comtrade 2024; top origins Oman, Russia, Qatar, UAE, Bahrain — parent context, not billet-only |
| 2024 India HS 760120 exports (parent, alloyed unwrought) | ~US$1.25B / ~0.60 Mt | US$1,250,017.72K / 604,281,000 kg — WITS / UN Comtrade 2024; PARENT heading covers alloy ingots plus billets plus wire bars plus wire rods plus other cast forms — 6xxx alloy BILLET-only tonnage (India 76012020) is a subline inside this total |
| 2024 India HS 760120 imports (parent, alloyed unwrought) | ~US$833.8M / ~0.32 Mt | US$833,810.58K / 322,392,000 kg — WITS / UN Comtrade 2024; top origins Malaysia, Qatar, Bahrain, UAE, Russia — parent context, not billet-only |
| Billet-only eight-digit tonnage | India 76011020 and 76012020 — DGCI&S / ICEGATE extract required | WITS does not publish at the Indian eight-digit level; use paid customs extracts or DGCI&S / TRADESTAT for actual billet-only volume |
| Leading parent HS 760120 alloy destinations | Mexico ~US$154.7M, Brazil ~US$122.2M, Korea Rep. ~US$85.1M, United States ~US$78.2M, Turkey ~US$75.7M, Japan, Spain, Taiwan (Other Asia nes), Canada, Italy | Directional planning — 6xxx alloy billets sit inside this parent heading alongside alloy ingots |
| Leading parent HS 760110 not-alloyed destinations | Korea Rep. ~US$592.0M, Malaysia ~US$494.8M, Turkey ~US$421.6M, China ~US$266.0M, Japan ~US$253.6M | Directional planning — not-alloyed billets sit inside this parent heading alongside not-alloyed ingots and wire |
| Dominant export billet SKUs | 6063 architectural + 6061 / 6082 structural + 6005 / 6005A medium-strength + not-alloyed billets (DC-cast, homogenized to buyer press window) | Alloy chemistry, diameter, length, and homogenization determine extruder buyer channel fit |
Buyer Requirements
Buyer Requirements
- Extruder buyer document lists must match the HS billet line on the shipping bill.
- Require heat / alloy / diameter / length + homogenization chart reconciliation rules in the purchase contract.
- Certificate of origin wording follows corridor FTA claims — confirm early.
- Inspection + homogenization audit certificates (if any) named before stuffing.
- Rejection and claim windows stated beside Incoterm on the PO.
Extruder buyers in docs programmes request sample slugs, written Mg-Si + Fe / Cu / Mn spec, homogenization chart, lot MTC, LME-linked FOB pricing, and EEPC / IEC proof — architectural fabricators and OEM structural extruders add homogenization audit evidence or PPAP-style approval where applicable.
Country-wise Opportunities
Market Snapshot
- Destination checklist packs differ: US duty overlays vs Korea OEM audit fields vs SEA distributor baselines.
- Country opportunity notes should match the HS and COO story on the file.
- Do not reuse one destination annex for all ten corridors.
- Archive corridor-specific compliance printouts with each shipment file.
Documentation requirements shift per destination row — Certificate of origin depth for USMCA-linked Mexican billet flows, FTA-aware paperwork for ASEAN and Turkey, homogenization audit evidence for Korean and Japanese OEM structural programmes. Cross-check with corridor guidance before locking your paperwork template.
Directional country opportunity profile for Indian aluminium extrusion billet exporters
Swipe →
Data table — swipe horizontally on small screens
| Country | Demand Profile | Key Requirement Focus | Opportunity Note |
|---|---|---|---|
| Mexico | 6063 architectural + 6061 / 6082 structural extrusion for nearshoring profile mills and fabricators | Homogenization discipline + Mg-Si chemistry lock + PPAP-style packs for OEM structural | Top WITS 2024 HS 760120 parent partner (~US$154.7M) — 6xxx billet subline sits inside this corridor |
| Brazil | 6063 architectural fenestration + 6082 structural extrusion demand across a wide industrial base | 6063 anodizing-quality homogenization + MTC discipline + FTA-aware paperwork | Second WITS 2024 HS 760120 parent partner (~US$122.2M) — architectural extrusion pull |
| South Korea | 6082 / 6061 high-spec extrusion + 6063 architectural for profile mills and rolling-adjacent programmes | Tight Mg-Si windows + deep MTC + homogenization audit + OEM PPAP for structural | Third WITS 2024 HS 760120 parent partner (~US$85.1M); also large HS 760110 parent partner (~US$592.0M) |
| United States | 6063 architectural + 6061 / 6082 structural extrusion offtake; Section 232 aware landed-cost planning | Homogenization discipline + Mg-Si lock + USMCA-linked documentation where relevant | Fourth WITS 2024 HS 760120 parent partner (~US$78.2M) — Section 232 overlay dominant |
| Turkey | 6063 architectural + 6082 structural extrusion demand for fenestration and industrial profiles | Homogenization + Mg-Si chemistry + FTA-aware paperwork | Fifth WITS 2024 HS 760120 parent partner (~US$75.7M) plus HS 760110 (~US$421.6M) — dual-line corridor |
| Japan | 6082 / 6061 high-spec extrusion for transport and industrial profiles | Tight impurity ceilings + homogenization audit + OEM PPAP + conductivity where relevant | HS 760120 top-ten partner + HS 760110 (~US$253.6M) — quality-driven, OEM-linked extruders |
| Malaysia | 6063 architectural extrusion and distributor demand across Southeast Asia | MTC discipline + consistent homogenization + FTA-aware duty | Large WITS 2024 HS 760110 parent partner (~US$494.8M) — extrusion-hub demand |
| Vietnam | Growing architectural extrusion and structural profile mill capacity pulling 6063 and 6082 billets | MTC discipline + FTA rules of origin + expanding OEM audit expectations | Present across HS 760110 / 760120 parent partner lists — expanding extrusion corridor |
Americas extrusion corridors
Documentation packs for Mexico and Brazil should reconcile India 76012020 billet filings with invoice alloy lines, packing-list heat / diameter marks, and homogenization chart references before seals go on. Parent HS 760120 market context belongs in the commercial note, not as a substitute for eight-digit accuracy. Architectural lots need soak-chart attachment discipline; structural lots need mechanical / chemistry acceptance fields aligned across MTC and PO.
Asia-Pacific high-spec corridors
Korea and Japan destination annexes often add OEM audit fields, tighter impurity cross-references (EN 573-3 / AA / JIS), and photo evidence requirements — build those into the pre-seal checklist rather than improvising at the yard. Parent HS 760110 / 760120 dual exposure means docs teams must keep not-alloyed and alloy billet files from sharing the wrong HS line. Refresh destination checklists when buyer audit packs change.
US, Turkey, and Southeast Asia
US files need live tariff / Section 232 printouts archived beside the shipping bill; Turkey and SEA files emphasise FTA / COO correctness, ISPM-15 on wood cradles, and clean packing-list identity. Do not reuse a single destination compliance annex across US, Turkey, and Malaysia — the hold risks differ. Fifteen-minute pre-seal cross-checks catch corridor mismatches before they become pier problems.
Expert Insight: Corridor Discipline
Expert Insight Box
Country customs behaviour on HS 7601 billet sublines varies materially — Korean broker discipline differs from Mexican USMCA-linked practice. Build corridor-specific document sub-checklists inside the master checklist so your CHA delivers cleanly per destination.
On documentation programmes, Saurabh Mittal connects corridor discipline to the shipping bill. File India HS 76011020 or 76012020 for the alloy the destination actually ordered, and make sure invoice, packing list, and MTC + homogenization chart tell the same corridor story. Document mismatches usually start as corridor mismatches on billet lots.
He tells docs teams to refresh destination checklist packs when corridors shift — US Section 232 overlays, TARIC notes, FTA certificates — every quarter alongside parent HS partner data. Paperwork that matches last year's corridor is how holds begin at the pier.
Sourcing Checklist
Checklist
Buyer Checklist
Compliance Checklist
Checklist
Compliance Notes
Common Buyer Mistakes
Common Mistakes Box
Future Market Trends
Key Statistics
- Pre-seal digital document packs (MTC + chart + photos) become the default buyer expectation.
- HS billet-subline mistakes get caught earlier as customs data quality improves.
- US duty overlay printouts belong in the archive as living documents, not one-time PDFs.
- Trend: claim defense depends on timestamped LME references and lot photo trails.
Customs digitisation increases pre-arrival document scrutiny — exporters who QC invoice / MTC + homogenization chart / packing list alignment before cutoff avoid demurrage trends seen at busy ports.
Extruder buyer audit portals now archive MTC + homogenization copies per lot — document expiry management becomes ongoing, not shipment-only.
Exporter Checklist
Checklist
Sources
- WITS / UN Comtrade — India exports HS 760110 by partner, 2024 (parent context)
- WITS / UN Comtrade — India imports HS 760110 by partner, 2024 (parent context)
- WITS / UN Comtrade — India exports HS 760120 by partner, 2024 (parent context)
- WITS / UN Comtrade — India imports HS 760120 by partner, 2024 (parent context)
- WITS / UN Comtrade — Aluminium waste and scrap trade, HS 7602 (contrast)
- Federal Register — Section 232 aluminium proclamations (verify live)
- GovInfo — FR 2026-11314 Section 232 aluminium/steel/copper proclamation (Jun 4, 2026)
- White House — Further Adjusting Tariff Regimes for Aluminum, Steel, and Copper (Jun 2026)
- CBP — Aluminum HTS subject to Section 232 (heading 7601 listed; verify live)
- UN Comtrade Database
- ITC Trade Map
- India Ministry of Commerce — TRADESTAT / MEIDB
- DGFT (India) — IEC / trade portal
- ICEGATE — Indian Customs EDI (eight-digit billet extract source)
- India CBIC — Customs Tariff (Chapter 76)
- EximGuru — ITC-HS 76011020 Aluminium, not alloyed: Billets
- EximGuru — ITC-HS 76012020 Aluminium alloys: Billets
- EEPC India
- London Metal Exchange — Aluminium (LME cash / 3M reference)
- Aluminum Association — Teal Sheets registered alloy designations
- European Aluminium — extrusion industry data
- EN 573-3 aluminium wrought alloy chemical composition (BSI / CEN)
- USITC Harmonized Tariff Schedule (search 7601)
- European Commission TARIC
- ISO 9001 overview
- Altus Exports — Engineering Goods
All sources accessed 2026-08-01 during the Aluminium Billets factual sweep. Prefer primary government, exchange, and multilateral trade databases (WITS/UN Comtrade for HS 760110 / 760120 parent context, DGCI&S / TRADESTAT / ICEGATE for eight-digit billet sublines, CBIC, USITC, LME, EEPC, AA Teal Sheets, EN 573-3) when citing figures in contracts or buyer presentations.
Document field requirements vary by destination — reconcile this checklist with buyer LC terms, extrusion-mill quality pack expectations, and CHA filing rules per consignment against India HS 76011020 / 76012020.
Conclusion
Documentation QC before vessel cutoff prevents destination holds — invoice, packing list, MTC + homogenization chart, shipping bill, and BL must tell one billet lot story under India HS 76011020 / 76012020.
Altus Exports assembles export document sets for aluminium extrusion billet FCL programmes — export products from India with EEPC-aligned packs.
Start exporters on How To Export Aluminium Billets From India; extruder buyers on Source Aluminium Billets Directly From India.